Here are all the chassis and cabinets we carry for your DIY pleasure. |
| ||||
Chromed, screenprinted chassis. Octal holes are a perfect fit for the Belton sockets used in our kits, also has "double D" strain relief hole for cord. | | 5E3 CHASSIS CHROMED SCREEN PRINTED DIY. Fits the Belton sockets we use in our kits perfectly. 14.5" by 2.5" high, by 4" deep. Chromed and screen printed, MADE IN USA. | | 18W Marshall Style Steel Chassis, Made in USA. A Perfect Match for our 18W TMB Kit!! Front and Rear Faceplates Now Available!! |
| ||||
| ||||
Steel Chassis for JCM800 2204A VERSION 2 50w Kit. Fits Plexi Style Head Cabinet. (Does not match our Version 1 kit) Accepts Carling Power & Stand-By Switches instead of the Lighted Rocker Switches. Front and Rear Faceplates Now Available!! A Perfect Match for our JCM800 2204A Version 2 Kit!! MADE IN USA. | | Chassis for JCM800 2203A 100W amplifier. Fits Plexi Style Head Cabinet. Accepts Carling Power & Stand-By Switches instead of the Lighted Rocker Switches. Front and Rear Faceplates Now Available!! Dimensions: 25" long (plus a 3/4" wing on each end) x 6.75 deep x 2.5" high. A Perfect Match for our JCM800 2203A Version 2 Kit!! MADE IN USA. | | JTM 45 Style Chassis for Tube Amp Kit Matching Steel Chassis for our JTM45 Tube Amp Kit! Punched Steel, Room for KT66 tubes, Made in USA. |
| ||||
| ||||
Punched steel chassis for our JTM50 & JMP50, and 50w 1987 Plexi Kits. Power transformer cut-out will fit 40-18033 & 40-18054 PT's. Output transformer mounting holes will fit 40-18025 & 40-18039. MADE IN USA. | | TW Express Style Chassis to match our TW Express Style Tube Amp Kit. 17" long x 8" depth by 2" high. Ends are curled under, as opposed to our Marshall style chassis that have the "wings" on the ends. Punched Steel, MADE IN USA. | | Stainless Steel, Super Heavy Duty, Punched Chassis for Dynaco Mk3. Same dimensions as original. Has iec power cord cut out, holes for heavy duty binding posts, input jack, and bias point. Also has additional rectifier tube socket cut-out, so you can parallel two together or use a can capacitor in its place. Original or repro Mk3 cages will fit as on original. Nice stainless steel finish. Includes top and bottom. Custom built chassis made in Chicago IL, USA. |
| ||||
| ||||
NEW ST-70 type Stainless Steel Punched Chassis. Same dimensions as original. Upgrade chassis has cut-outs in front for modern RCA jacks. These are spaced further apart for modern cables. Cut-outs in Back for Binding Posts instead of the original terminal strips make hooking up speaker wires a breeze. These also provide much better contact for the speaker wires. IEC Power Cord Socket Cut-Out on back. Original or repro st70 cages will fit, as on original. Nice stainless steel finish. Check out our custom made Transformers and Boards to build your amp, or you could rebuild your old st70 on to this New, Improved, Chassis. Comes with top and bottom pieces. MADE IN USA. | | A NEW ST-35 type Stainless Steel Punched Chassis for the DIYTube ST-35. Chassis has cut-outs in front for modern RCA jacks. These are spaced further apart to fit modern cables and jacks. Cut-outs in Back for Binding Posts instead of the terminal strips. These provide much better contact for the speaker wires. IEC Power Cord Cut-Out. Nice Super Heavy Duty stainless steel finish. Check out our custom made Transformers and Boards to build your amp. The chassis is punched for the diytube board not the original pc13. Comes with top and bottom pieces. 13.25" x 9.5" x 1.75" MADE in the USA. | | The size is 12 X 8 X 2. It is made out of .051 inch aluminum. Great for those DIY projects. Grab our punch kit and nibbler tool and start fabricating. Hammond Part # 1444-22. There is a bottom available, sold separately. |
| ||||
| ||||
| HAMMOND CHASSIS BOTTOM FOR 1444-22 HAMMOND CHASSIS BOTTOM FOR 1444-22 Bottom for the Hammond 1444-22 Chassis | | Perfect for DIY Guitar Effects Pedal Projects! Dimensions: 5.71" (145mm) x 3.74" (95mm) x 1.77" (45mm) | | ST70 CHASSIS BOTTOM ST70 Chassis Bottom |
| ||||
| ||||
Triode is happy to offer Jensen Speakers! Please be aware that we do not stock these speakers -- we place an order with Jensen each week for the units ordered that week. Your Jensen order could take up to 1-1.5 weeks to complete. | | SPECIAL ORDER, PLEASE ALLOW UP TO 4 WEEKS Dimensions: Chassis Cut-Out: 16 3/8" Height 9" x Width 26" x Depth 8 1/4" | | Dimensions: (Chassis Cut-Out: 16 1/2", Rear Cut-Out: 24 11/16") - (H) 10 3/4" x (W) 29" x (D) 8 1/4" Covering: Marshall Black Levant, Medium Gold Piping, Small Gold Piping Hardware: Gold End Cap Handle, Large Rubber Feet, Gold Metal Mesh SPECIAL ORDER |
|
Triode, USA For Customer Service, Questions, Shipping, Ordering, etc., M-F 9AM-4PM CT 1-800-774-3201 Email us Anytime: questions@triodestore.com TECH SUPPORT is available 4 days per week: 9 AM to 4 PM CT Monday, Tuesday, Thursday & Friday Ph 1-800-774-3201 Or email: tech@triodestore.com |